CAD

There are lots of articles in this category about CAD that visitor of Mechanical Base could learn lots of useful tips about CAD.

Recommended Book Set To Learn Solidworks™: Beginner’s Guide to SOLIDWORKS™ 2020

Recommended Book Set To Learn Solidworks™: Beginner’s Guide to SOLIDWORKS™ 2020

Solidworks™ is one of the most used CAD/CAM/CAE tools by today’s engineers and designers. So, it could be very advantageous…
Assigning Material To Parts And Bodies In Solidworks

Assigning Material To Parts And Bodies In Solidworks

Materials are very important in engineering and designs. You need to define the material of your application in a well…
What Is Siemens NX™ And Cost Of It? Which Companies Are Using Siemens NX™?

What Is Siemens NX™ And Cost Of It? Which Companies Are Using Siemens NX™?

Siemens NX™ or Unigraphics NX™ is PLM software that provides various kinds of tools inside it. For an engineer and…
Drawing Polygons Effectively In Siemens NX Sketching

Drawing Polygons Effectively In Siemens NX Sketching

Also there is a special command that you can draw polygons easily in Siemens NX. With this command, you can…
Scaling Sketch Entities In Siemens NX

Scaling Sketch Entities In Siemens NX

Scaling is also avaliable in Siemens NX 3D CAD. But you can scale your 2D sketches also in Siemens NX…
Resizing Lots Of Sketch Entities Same Time In Siemens NX

Resizing Lots Of Sketch Entities Same Time In Siemens NX

If you have lots of sketch entities that are needed to be resized into same dimension, or if you have…
Offsetting Curves And Sketch Entities In Siemens NX

Offsetting Curves And Sketch Entities In Siemens NX

Offsetting is a common features of nearly all CAD softwares. Siemens NX also has offset command for sketching. In here,…
Moving Curves And Sketches In Siemens NX

Moving Curves And Sketches In Siemens NX

Moving curves and sketches in Siemens NX is a very easy process with ‘Move Curve’ command. You can move your…
Creating Corners From Sketch Entities With ‘Make Corner’ Command In Siemens NX

Creating Corners From Sketch Entities With ‘Make Corner’ Command In Siemens NX

From line segments or other sketch entities, you can create corner structures in Siemens NX with ‘Make Corner’ command in…
The Use Of Quick Extend Command In Siemens NX

The Use Of Quick Extend Command In Siemens NX

This is a very useful too just as Quick Trim command in Siemens NX. You can extend the selected objects…
Back to top button