All The Nodal Boundary Conditions In ANSYS® Mechanical
ANSYS® provides various kinds of nodal tool to define boundary conditions in nodal-base. If you are dealing with a more theoretical project, you can use nodal boundary condition definitions in ANSYS®.
YOU CAN LEARN ANSYS IN MECHANICAL BASE; Click And Start To Learn ANSYS!
One of these nodal-based boundary conditions in ANSYS® is the ‘Nodal Displacement’. Here, we explain how to define nodal displacement in ANSYS® Mechanical.
Displacement values are generally used as input values to see the stress and strain distribution on constrained parts or materials.
To define nodal displacement in ANSYS®, you need to create a named selection for it. This named selection must be defined as nodal-based as below. You must select the node selection tool and select the nodes from the created mesh structure.
After that, right-click on analysis in ANSYS® Mechanical, then hover your mouse on the ‘Insert’ tab. And click on the ‘Nodal Displacement’ as shown below.
Then select the created nodal named selection for nodal displacement as shown below.
There are three components that you need to define your nodal displacement value for each of them. You can define a constant value as above. Also, you can define the displacement value as; tabular(time), function, or free.
As you see above, the definition of nodal displacement is very simple in ANSYS® Mechanical.
Do not forget to leave your comments and questions below about the definition of nodal displacement in ANSYS® Mechanical.
NOTE: All the screenshots and images are used for educational and informative purposes. Images used courtesy of ANSYS, Inc.