All ProgramsANSYSANSYS Analysis ToolsANSYS WorkbenchCAE

How To Add Remote Force In ANSYS® Mechanical(Illustrated Expression)

In this article, we will show how to add Remote Forces to the parts in ANSYS® Mechanical. Remote Forces are generally used for attaching forces to geometric features that real application of force can be far away from this geometric feature.


ANSYS Workbench for Mechanical Engineering: A Step by step to learn ANSYS Workbench

If you are interested to learn the ANSYS® at an engineering level, click on the given link or the ‘Shop Now’ button to check the recommended book by Mechanical Base, from Amazon!

To calculate the moments that originate from remote forces, Remote Force application in ANSYS Mechanical is a very useful tool. Also, Remote Force is a boundary condition for finite element methods which makes Remote Forces is very important to define correctly on geometry.

You will learn how to apply a Remote Force to geometrical features in ANSYS® Mechanical.

YOU CAN LEARN ANSYS® IN MECHANICAL BASE; Click And Start To Learn ANSYS®!

How To Add Remote Force In ANSYS® Mechanical?

Click on Remote Force

To add or apply Remote Force on geometry in ANSYS® Mechanical, you need to right-click on the analysis system(Static Structural in here) and hover the cursor on the Insert button as shown by the red arrow above. Click on Remote Force as shown by the red box from the list.

Select the geometric feature.

Select the geometric feature to apply Remote Force then click Apply on the Geometry tab as shown by the red arrow above.

Enter your Remote Force place in X, Y, and Z.

You could define the remote force’s place in 3D space by entering X, Y and Z coordinates in ANSYS® Mechanical. We entered 5, 5, and 10 mm of coordinates respectively.

Select Remote Force application method

Select the Remote Force application method from either components or vectors. If you select components, you need to enter the force values in X, Y, and Z coordinate values individually. If yıu select the Vector method, you need to enter a force value and a vector in ANSYS® Mechanical.

Remote Force application in ANSYS® Mechanical

As you can see above we defined 500, 600, and 700 Newtons of forces in each coordinate respectively as shown in the red box. Also, you can see the place and resultant of the entered values as shown by the red arrow. The remote force’s place is in the 3D space in ANSYS® Mechanical.

Conclusion

Applying remote force to a geometric feature in ANSYS® Mechanical is very easy as you can see.

Do not forget to leave your comments and questions below about the Remote Forces ANSYS® Mechanical.

NOTE: All the screenshots and images are used for educative and informative purposes. Images used courtesy of ANSYS, Inc.


Related Articles

2 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button