In Siemens NX, you need to create a another plane in drawing scheme to obtain proper skecthes or for an other purpose. There are lots of tools in Siemens NX to obtain a proper plane according to you needings. In this text we will show you how to create planes in Siemens NX by using these various tools. You could create plane in Siemens NX in a professional manner if you follow the steps below.
YOU CAN LEARN SIEMENS NX IN MECHANICAL BASE; Click And Start To Learn Siemens NX!
How The Datum Plane Command Is Used In Siemens NX?
Plane creation in Siemens NX done by Datum Plane command. You need to open Datum Plane command by clickling on it as shown by green arrow.
This is the Datum Plane command interface in Siemens NX and these are the plane creation tools in Siemens NX. You could select according to your needing in plane creation in Siemens NX.
Inferred: This is very general plane creation method that if you select this, you only need to select features in drawing scheme, and then the method is automotically chosen for you in Siemens NX.
At Distance: You can create a plane by entering a distance from a feature that you selected in Siemens NX.
At Angle: You can create your plane, by entering an angle value from a selected feature by you in drawing scheme of Siemens NX.
Bisector: You could create a plane by selecting a two of another planes or surfaces to create your plane between them that equally placed in Siemens NX.
Curves And Points: You can create your plane by selecting curves or points that create a plane geometricaly in Siemens NX.
Two Lines: You can create a plane by selecting two lines or edges imn drawing scheme in Siemens NX.
Tangent: You can create tangent plane on bodies in Siemens NX.
Through Object: Planes could be created through selected bodies by you in Siemens NX.
Point And Direction: You could create your plane by selection of a point and a direction line or edge in Siemens NX.
On Curve: Selection of a curve or edge to create a plane in Siemens NX.
X-Y-Z Planes: You can select one of them to create your plane on these planes in Siemens NX.
For example we selected Inferred method to create a plane, and selected the Z-Y Plane as shown by green arrow in distance of 50 mm as shown by red arrow.
Then click on OK or Apply button as shown by red box to finish your creation of a plane in Siemens NX.
As you can see our plane is created by using Datum Plane in Siemens NX.