Offsetting Curves And Sketch Entities In Siemens NX

Offsetting is a common features of nearly all CAD softwares. Siemens NX also has offset command for sketching. In here, we explain the offseting of sketch objects in Siemens NX with ‘Offset Move Curve’ command, with a very basic example below.

How To Use ‘Offset Move Curve’ Command In Siemens NX Sketching?

Select the curve or curves to be offset in Siemens NX.

To offset curves and sketch entities in Siemens NX, you need be inside an active sketch like above. Or you need to open the editing of sketch of curves and sketch entities to use ‘Offset Move Curve’ command in Siemens NX. Click on ‘Offset Move Curve’ command in Siemens NX as shown by orange arrow.

YOU CAN LEARN SIEMENS NX IN MECHANICAL BASE; Click And Start To Learn Siemens NX!

After entering into the ‘Offset Move Curve’ command, click to select the sketches or curves to be offsetted as shown by green arrow above. Then enter the distance value of offset as shown in orange box above.

The preview is shown above. Click on ‘OK’ or ‘Apply’ button to complete the offset process in Siemens NX.

Offset line segment in Siemens NX.

As you see above, the line is offsetted in Siemens NX sketching. The use of ‘Offset Move Curve’ command in Siemens NX is very easy like above. Do not forget to leave your comments and questions about ‘Offset Move Curve’ command in Siemens NX below.

Download And Install Siemens NX 12!

Your precious feedbacks are very important for us.

Share This Post! Share Tweet Share

Write your comment on this topic.