blank  

Next Post:

Standard Holes With Hole Command In Siemens NX(Illustrated Expression)

Relevance Center Of ANSYS® Mechanical Meshing(Illustrated Expression)

blank

The relevance center option of ANSYS® Meshing can be simply called ‘resolution’. You can change this resolution value according to your system and computational power. In this article, we will show you how to change the relevance center of a mesh structure in ANSYS® Mechanical.

How To Change Relevance Center In ANSYS® Mechanical Meshing?

blank
Select a Relevance Center value for meshing in ANSYS® Mechanical.

Click on the ‘Mesh’ tab as shown by the red box above, then adjust the relevance center value as shown by the red arrow above.

Coarse: The coarser mesh structure will be obtained with a lesser number of mesh elements in ANSYS® Mechanical.

Medium: Medium-sized mesh structure will be obtained.

Fine: Finer mesh structure is obtained with this selection in ANSYS® Mechanical.

blank

Relevance Center value is selected as Coarse; This is the obtained mesh structure in ANSYS® Mechanical.

blank

Relevance Center value is selected as Medium; This is the obtained mesh structure in ANSYS® Mechanical. You can see that it is a little bit finer compared with the Coarse one.

blank

Relevance Center value is selected as Fine; This is the obtained mesh structure in ANSYS® Mechanical. You can see that it is the finest mesh structure around other Relevance Center options.

Conclusion

So you understand the logic of Relevance Center in ANSYS® Mechanical Meshing.

Do not forget to leave your comments and questions below about the installation of ANSYS® Mechanical.

NOTE: All the screenshots and images are used in education and informative purposes. Images used courtesy of ANSYS, Inc.


  • Site Comments

At least 10 characters required.