Cocentric Mate In Solidworks Assembly
This is a very useful command of Siemens NX sketching. You can trim out the unwanted excessive sides of features in Siemens NX sketching. In here, we will show you how to do trimmings in Siemens NX sketching effectively with ‘Quick Trim’ command.
To use ‘Quick Trim’ command in Siemens NX, you need to be inside an active sketch like above. Or if you want to trim out an sketch object like above, you need to open that sketch.
Click to activate ‘Quick Trim’ command as shown by red arrow above. You can select a boundry object or curve as shown by green arrow above, that all the trimmings will be done according to this selected curve.
In the second section of ‘Quick Trim’ command as shown by blue arrow above, you can selet the objects to trim according to the boundry object. As you see that, the trimmed section is shown as red color. Click to trim objects.
Also you do not need to select an boundry curve to trim objects. You can directly select the curves to trim according to the closest boundry as shown by green arrow in above example. The curve that is selected directly as shown by blue arrow will be trimmed out up to first intersection as shown by green arrow in Siemens NX.
YOU CAN LEARN SIEMENS NX IN MECHANICAL BASE; Click And Start To Learn Siemens NX!
This is a very quick way to do trimmings in Siemens NX.
Here is the use of ‘Quick Trim’ command in Siemens NX is very basic. Do not forget to leave your comments and questions about ‘Quick Trim’ command in Siemens NX below. Your precious feedbacks are very important for us.